96
GB
Altering a washing programme
During programming :
Any alteration is possible before you press the
"Start/Pause" button
.
"Finishing time"
for the cycle is updated
to suit your alterations.
If you select a "Delayed finish”
, the finishing
time is kept unless the new programming
involves the set finishing time being exceeded.
In this case, the "Delayed finish" option is
cancelled and the cycle finishing time is
corrected.
After the start of the cycle:
• You cannot alter the type of textile (for instance,
switch from "COTTON" to "SYNTHETICS" or
from "SYNTHETICS" to "DELICATES" etc.).
To change the type of textile during a cycle,
you must cancel the current programme and
then programme a new cycle.
• You can alter the temperature at the start of
the washing phase, after putting the machine
in "Pause" mode.
The finishing time displayed will then alter
accordingly.
• You can alter the spin speed during the whole
of the cycle before spinning commences.
• You can select "No Spin" 100 and "Hold and
Rinse"
up to the end of the rinsing phase
(until the "Rinse"
cycle progress light goes
out).
• You can alter the "Delayed finish" time
at
any time during the waiting period before the
cycle effectively starts.
If you wish to cancel the "Delayed finish"
, time during this period, turn the knob
anti-clockwise until the time shown on the
display
can reduce no further (the time
displayed therefore corresponds to the
finishing time for your programme) and then
briefly press the
.
The cycle will start immediately
• Once you have selected a "Delayed finish", you
can only activate the "Pre-wash"
and
“
” (anti-creasing) options
during the period before the cycle effectively
starts.
• You can activate the "Extra rinse"
until rinsing
starts (until the "Rinse"
cycle progress light
illuminates).
• You can switch of any of the options throughout
the cycle, provided that the relevant action has
not already started.
At the end of the cycle:
When the "Stop" light
is lit:
-
You can programme a new cycle without
having to switch to the "Stop" position on the
knob
. All you have to do is press any of the
buttons
,
,
, or turn the knobs
or
.
The machine is then ready for a new
programme.
- If you press the "Start/Pause"
, button
directly after the end of the cycle, the machine
restarts the last cycle programmed, including
any options.
5
5
R
R
1
1
4
4
3
3
2
2
1
1
B
B
5
5
A
A
5
5
Details of the functions
Delayed Finish
You can delay the end of the programme by
1 to 24 hours in order to take advantage of
night rate electricity or to have the programme
finish when you wish.
To do this, use the
button to select the
delayed finishing time
you wish.
All the time before the "Delayed finish"
selected, the time on the display
remains fixed at the time selected and the
"Delayed finish"
LED flashes until the
cycle starts.
A
A
R
R
