97
GB
Door safety lock:
As soon as the washing cycle starts, the door
on your machine locks.
Once the cycle is complete and when the
machine is stopped with the drum full of
water, the door unlocks immediately.
If you have programmed a "Delayed finish",
,the door is unlocked throughout the
waiting period before the cycle effectively
starts.
If you wish to open the door during a cycle,
briefly press the "Start/Pause" button
and
wait a moment or two for the door safety
system to unlock.
Depending on exactly when in the cycle
you wish to open the door, the time delay
may be longer because a cooling-down
period must be added.
In fact, during the cycle, for the door safety
lock to release, the temperature must not
be higher than 60°C, so that you do not
risk receiving being scalded or burnt.
.
Water safety system:
While your machine is operating, constant
control of the water level avoids any water
overflowing.
Load Balancing system:
Your washing machine is fitted with a safety
system to limit spinning when it detects a
poorly distributed load (this poor distribution
is called an "imbalance"). In this case, your
washing may not be adequately spun. You
should therefore redistribute it evenly in the
drum and programme a new spin.
Anti-foam safety system:
You washing machine can detect too high a
production of foam and the
light
illuminates during spinning.
At such times, the spin stops and the machine
drains.
Then the cycle continues, adapting the spin
sequences and possibly adding an extra rinse.
The finishing time is altered.
During subsequent washes, reduce the
amounts of detergent you use.
Tap closed
When the "Tap closed" light
is lit, this
means that the water supply to your machine
is blocked:
- Check whether the water tap is open
correctly,
- Check whether the water hose is bent or
kinked.
5
5
Automatic safety systems
Programme for standardised comparative testing
Programme ..................................................................................................................
COTTON
Temperature ........................................................................................................................
60°C
Load ......................................................................................................................................
6 kg
Duration ..............................................................................................................................
1 h 55
Energy ..........................................................................................................................
1,02 kWh
Water ......................................................................................................................................
45 l
To comply with the statement on the energy label, the tests are conducted in accordance with European Directive 92/75/EEC,
with a nominal capacity ensuring that all the CEI detergent is used as soon as the washing phase starts.
