93
GB
Programming
• Briefly press the "Start/Pause" button
to interrupt the cycle.
• Insert or remove the item(s)*.
• Briefly press the "Start/Pause" button
to restart the cycle .
(*) It may take 1 or 2 minutes for the lid to unlock.
If you have selected a "Delayed Finish", you can instantaneously access
the drum at any time during the phase before the cycle starts without
having to interrupt and restart the cycle.
5
5
5
5
The "Pause" light
is lit
The light
, which was lit
before the pause, lights up
again.
B
B
B
B
Inserting or removing an item during the cycle (impossible during spin):
Cancelling during programming, washing or a pause:
• Hold down the "Start/Pause" button
for at least 3 seconds.You can do
this at any time during the period before the cycle, during the cycle or even
during a pause.
If you have programmed a "Delayed Finish"
time and have cancelled
during the waiting period before the cycle effectively starts, all your
programming will be cancelled.If you only wish to cancel the "Delayed Finish"
, time, turn the
knob to the left until you return to the time the selected
washing cycle finishes.
R
R
5
5
Return to initial display
Finishing time and display of
the selected programme.
For more details of the various functions, please refer to the section on "DETAILS OF THE
FUNCTIONS".
Important:
if you have stopped your machine during a washing cycle by selecting the "Stop"
position or after a power failure, when the machine is switched on again, the washing cycle
automatically returns to the point at which it was interrupted.
Child safety:
Lights and/or display
• If you wish to protect your programming, use the Child Safety"
system
by simultaneously holding down the following buttons
suivantes "Pre-wash"
and "Intensive"
for at least 3 seconds
.
.
It is useless to press the "Start /Pause" button again : once you have
selected "Child Safety"
the controls and the options are locked to
avoid any erroneous operation.
• To alter your programming, you must deactivate the "Child Safety" system
, Proceed in the same way: simultaneously hold down the following
buttons
suivantes "Pre-wash"
and "Intensive"
for at least 3
seconds
.
.
You can deactivate the "Child Safety" system at any time.
3
3
3
3
+ The
light is lit
throughout the cycle until it is
complete
The
light goes out
