Brandt BPV6210B, Instruction Manual

Page: 39 / 232

When the hob has been operating for some time, there will be some residual heat. The letter “ H ”appears
to warn you to keep away from it.
Another safety feature of the hob is automatic shutdown. This occurs whenever you forget to switch off a
cooking zone. The default shutdown times are shown in the table below:
Power level
1 2 3 4 5 6 7 8 9
Default shutdown times (hour)
8 8 8 4 4 4 2 2 2
3.4 How to use BPV6210B
3.4.1 Start cooking
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Adjust the power regulating control to the desired level.
3.4.2 Finish cooking
Turn the cooking zone off by turning the power regulating
control to “ 0 ” .
Beware of hot surfaces
When the glass plate is hot, the hot hob warning indicator will light. Don’t touch the glass plate until the
indicator goes out. It can also be used as an energy saving function if you want to heat further pans, use
the hotplate while it is still hot.
A temperature sensor can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
EN-16
3.3.5 Over-Temperature Protection
3.3.6 Residual Heat Warning
3.3.7 Default working times