Brammo 2013 Empulse Owner'S Manual Download Page 63

Page: 63 / 112

Maintenance

Servicing and Maintaining Your Empulse

FRONT WHEEL REMOVAL/INSTALLATION

Note:

Before commencing any work on your Empulse, refer to “SAFETY

PRECAUTIONS”, page 36.

We recommend that removal of the wheel be done by your Brammo
Authorized Dealer or another qualified mechanic. Do not attempt to
remove the wheel on your own. Wheel removal requires mechanical
skill and professional tools.

Removal

1. Park your Empulse on a firm, level surface.

2. Support the Empulse securely and raise the front wheel off the

ground using a safety stand or a hoist.

3. Remove the two bolts securing LH front brake caliper to the front

forks.

4. Release the brake pads from the rotor and position the caliper

assembly aside. Support the caliper and avoid twisting the brake
hose.

5. Remove the two bolts securing RH front brake caliper to the front

forks.

6. Release the brake pads from the rotor and position the caliper

assembly aside. Support the caliper and avoid twisting the brake
hose.

Note:

Avoid depressing the front brake lever with the calipers

removed. Avoid getting grease, oil, or dirt on the disc or pad
surfaces.

7. Loosen the two left-side front axle pinch bolts.

8. Loosen the two right-side front axle pinch bolts.

Empulse.book Page 61 Thursday, June 27, 2013 11:03 AM

Summary of Contents for 2013 Empulse

















































































































Search results

Summary of Contents for 2013 Empulse

Reviews:

Related manuals for 2013 Empulse

Brands by name

Popular brands

Brammo 2013 Empulse, Owner'S Manual

Search results

Summary of Contents for 2013 Empulse

Reviews:

Related manuals for 2013 Empulse

Brands by name

Popular brands