manualshive.com logo in svg

BRAINTECH FM1000 series, User Manual, Page: 22 / 30

Share
Download
BRAINTECH FM1000 series User Manual Download Page 22

 

22

    *      Back                    # 
NEXT 
    F1 Cancel              F4 OK 

press * key, Can correct already input number   

Schedule    Open 
S:    Y[2006] M[10] D[22] 
S:          H[12] M[00] S[00] 
E:    Y[2006] M[10] D[22] 
E:          H[12] M[15] S[30] 
    *      Back                    # 
NEXT 
    F1 Cancel              F4 OK 
 

5.  Door  opens  compulsorily  from  12  o'clock, 
October  22,  2006  by  12  :  15  :  30  same  day.  If 
press F4, setting is saved and returns to previous 
screen. 
 
 

◆

Caution!! 

Forced  Close  mode  or  in  point  that  Schedule 
Close mode is applied, 
please  take  care  of  impossibility  for  taking  in 
and  out  by  all  methods  with  registered  RF  card 
and fingerprint !! 
Must  open  entrance  by  setting  entrance  action 
with Normal mode or Forced Open mode 

   
   

9. Usage by Entrance/Exit Method 

9.1 In case of fingerprint use 

☺  It is available to use that Finger Only article in exit and entrance method setting was selected !! 

Please 
Touch Finger 
 

1. Can input fingerprint if press # button. 
Input registered fingerprint to fingerprint reader. 

 

14

 

Oct      2006        21:37:44 

 
  Thank You 

2.  when  input  right  fingerprint,  screen  such  as  left  is 
registered and the door is opened with guidance sound 
of "Ok You can pass"     

14

 

Oct      2006        21:37:44 

 
No Trespassing 
 

3.  In  case  of  input  wrong  fingerprint  or  do  not  input 

fingerprint  within  5  seconds,  screens  such  as  left  is 
registered and    comes out guidance sound of "Please 
Contact your security Manager".   

       
     

9.2 In case of card use

 

☺  It is available to use Card Only article in exit and entrance method setting was selected !!   

RF CARD 
Recognition 

 

1.  if  put  close  registered  RF  card  on  RF  card  contact 
part of device, card is realized. 

14

 

Oct      2006        21:37:44 

 
  Thank You 
 

2.  When  input  right  card,  screen  such  as  left  is 
registered  and  comes  out  guidance  sound  of  "Ok  You 
can pass". 

14

 

Oct      2006        21:37:44 

 
No Trespassing 
 

3.  Occasion  recognized  wrong  card,  error  message 

such  as  left  is  registered  and  comes  out  guidance 
sound of "Please Contact your Security Manager". 

     

9.3 In case of password use 

☺  It is available to use Pin Only article in exit and entrance method setting was selected !!   

Summary of Contents for FM1000 series































Reviews:

No comments