37
4.1 Channel
( Analog input, Digital input, Analog output, Math input )
Analog input
After entering the Configuration mode, select
Channel
and press the
Enter
key to get into Channel mode.
It displays the Analog input
AI
first. Press directional keys
〈
〉
at the bottom to select the channel.
Afterwards, press directional keys
↑↓←
→
on the left hand side
to select the column.
After
Configuration 4.1 to 4.8, press
Back
key to return to real-time display, all configurations will be
memorized.
Figure 4 – 2
Name
: It is to define the name for each channel in maximum 6 characters. Press
Enter
, a keyboard
and several keys appear.
BackSP
key means backspace,
Select
key means to select a character or
number,
Caps on
means characters in capital, and
Caps off
means characters not in capital.
Desc
:
The description about a specific channel on the display.
Log Method
: The method of logging measured data. Select the column, and then choose the Log
method of Instant, Average, Minimum or Maximum data.
Disable:
Select
Disable
while a specific channel is not required at this time.
Instant: logging in the last measured data at the sampling interval
Average: logging in averaged measured data at the sampling interval
Minimum: logging in minimum measured data at the sampling interval
Maximum: logging in maximum measured data at the sampling interval
Summary of Contents for VR06
