Brainchild VR06 User Manual Download | Manualshive

Page: 91 / 96

background image

91

Q13: What is the product warranty period of time? How does the user handle the defective

recorder?

A13: It is 18 months after shipping from Taiwan. Contact your supplier once it becomes defective.

Q14:

How does the agent handle the defective recorder? What is the leadtime for the repairs?

A14: To be cost effective, the agent is requested to verify and return the defective board according to the

trouble shooting flow chart in the user manual.  If it is difficult to verify the defective board, then
the  whole  unit  may  be  returned  to  the  factory  for  repairing.  The  repairing  is  at  no  charge  if  it  is
within  warranty  period  of  time.  It  will  be  charged  at  reasonable  cost,  if  it  out  of  warranty.    The
lead-time will be 3 weeks after receiving the defective items by the factory.

Q15: What is the procedure to transfer data from the internal memory to CF card after the

internal memory is full?

A15: After 16MB internal memory is full, the earliest data and events will be saved into CF card in

small batch automatically, details in

3.11 Small icons

.

Q16: Is Alarm banner available in the recorder along with customized message display?

A16: Alarm banner is unavailable for customized message display. The alarm banner appears after

alarms or events occurred, or the internal memory or CF card is running shortage. A buzzer can be
set to activate if any alarms/events arise.

Q17: How many analog and math channels available and is it possible to retransmit these channels?

A17: Maximum 6 analog inputs plus 18 math inputs are available in one recorder. It is possible to

retransmit the analog and math channels by using 3-channel current output card AO183I or 3-
channel voltage output card AO183V.

Q18: Is the recorder supplied with OPC server?

A18: The OPC server is not available with the present recorder but the next generation of new recorder

VR20. However Observer II PC software does offer DDE solution to allow data transferred to
other devices like PLC, SCADA etc. Please review a few examples in

5.5 DDE dynamic data

exchange.

Q19: Which protocols and hardware interface recorder supports?

A19:

For RS-232, RS-422, RS-485 communication, the protocol is Modbus RTU. For Ethernet

communication, the protocol is TCP/IP.

Q20: How many recorders can be connected in a network?

A20: It depends on hardware interface selected. If it is Ethernet communication, maximum, 255 devices

can be connected in the network, each device in unique IP address. If it is RS 485 communication,
247 units can be connected in the network then.

«
...
89
90
91
92
93
...
»

Summary of Contents for VR06

































































































Reviews:

No comments

Related manuals for VR06

Brand: Lenovo Pages: 32

Brand: JNC Pages: 48

Brand: Datavideo Pages: 49

Brand: Olympus Pages: 113

Brand: Marantz Pages: 96

Black Vox Calculator

Brand: Rawerks Pages: 6

Brand: Olympus Pages: 2

Brand: Teac Pages: 72

USB Portable DVD Burner

Brand: Lenovo Pages: 60

Brand: Panasonic Pages: 108

Brand: Panasonic Pages: 123

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 430

Brand: Panasonic Pages: 76

Brand: Panasonic Pages: 14

Brand: Panasonic Pages: 157

P-55 AutoPrinter

Brand: Teac Pages: 1

Brand: ClonerAlliance Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands