Brainchild VR06 User Manual Download | Manualshive

Page: 90 / 96

background image

90

Q6: What kind of security is available in recorder?

A6: There are two kinds of security. The normal security offers a common password. The high security

with FDA 21 CFR part 11 compliance is available from version 2.2 on both recorder and PC
software Observer. It supports maximum 30 users with different passwords. The administrator has
the right to define supervisor and operators. The supervisor can change configuration, save and clear
data but not operators. Operators can only view the historical data, events and status.

Q7: What is Boot Rom? Anything related to Math option? Is it possible to upgrade it into new

version via internet or CF card?

A7: Boot ROM is a chip available in recorder, which contains boot loader information. The Boot ROM

BT181 has no option.  The Boot ROM BT182 has options of Math, Counter, Totalizer & FDA 21
CFR part 11  compliance.   It  is required  to remove BT181  away  and  install BT182 on  the  socket
when those options are needed.  It is not possible to upgrade it into new version via internet or  CF
card.

Q8: How does it upgrade into the new version of recorder system and PC software?

A8: If necessary, contact your supplier about the latest updates. The supplier is able to supply the latest

version  of  recorder  system  and  PC  software  via  email  or  FTP  (  file  transfer  protocol  )  for  easy
download  through  internet.    Follow  the  procedure  to  update  it  into  the  new  version  of  recorder
system.  Install the new version of Observer software. It shall automatically uninstall the old one.

Q9: If it needs to upgrade the recorder system, what do we have to take care?

A9: Any recorder system before V 1.20, it is mandatory to update first to V 1.20 and then to the latest

version i.e. it needs to upgrade twice. Direct update to the latest version could damage the DOC.

Q10: What are the differences between Observer I & Observer II PC software?

A10: Observer I is supplied for free. Observer II is supplied at additional cost. Observer I is used for

recorder configuration from PC and also it is used for reading historical data in PC at set time
period of 1 to 24 hours. Observer II is used for real time data monitoring in PC along with
configuration and historical data view.

Q11: How many AI, AO, DI, DO cards, and 24VDC auxiliary power card can be inserted into the

recorder?

A11: Maximum 6 cards in any combination can be inserted into rear Slots.

Q12: What are those larger capacities of compact flash cards supported by the recorder and

recommended manufacturer?

A12: We already offer the maximum 2GB CF card with each recorder. To be fully compatible, we

usually recommend

SanDisk

brand.

«
...
88
89
90
91
92
...
»

Summary of Contents for VR06

































































































Reviews:

No comments

Related manuals for VR06

Brand: Olympus Pages: 3

Brand: Olympus Pages: 2

Brand: Olympus Pages: 53

Brand: Panasonic Pages: 50

Electra Elite IPK Dterm

Brand: NEC Pages: 31

Brand: NatComm Pages: 20

Brand: vissonic Pages: 52

Brand: RCA Pages: 46

Brand: G Pages: 30

Brand: Yamaha Pages: 35

Brand: FAME Pages: 88

Brand: Radio Shack Pages: 14

Brand: Olympus Pages: 92

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 88

Brand: Panasonic Pages: 80

Diga DMR-EX75EB

Brand: Panasonic Pages: 88

Diga DMR-EX75EB

Brand: Panasonic Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands