22
Analog input card ( part number AI183V )
AI183V are analog input cards in 1, 2, 3 channels respectively. Each card includes linear input of ± 60mV,
± 20mA, ± 2V, and ± 20V only. To select a specific input, first set jumpers and switches according to the
sticker information on the card as
Figure
2–16
, and plug it into the rear slot then power on. The recorder
will automatically detect the card and display the specific input type, then show its source of a specific slot
in Configuration Mode. All inputs were initially set for -20mA~20mA from the factory.
Figure
2 – 16
Digital Output card ( DO181 ) / 6 relay alarm card
The digital output card includes 6 relays rated 5 Amp/240 VAC. Plug the card into rear slot and power on.
The recorder will automatically detect the card and then display the output type and its source of a specific
slot in
System Info
mode whilst doing the configuration. To set up the digital output card, please refer to
Event
,
Job
of
4.1 Channel
.
Digital Input card ( DI181 )
This card includes 6 channels of event 1, 2, 3, 4, 5 & 6. As above, plug the card into rear slot and power on.
The recorder will automatically detect it, and then display the input type and its source of a specific slot in
System Info
mode whilst doing the configuration.
Analog output cards ( AO183I, AO183V )
These two cards are 3-channel current output card AO183I, and 3-channel voltage output card AO183V.
They are used to retransmit process value to another device.
24 VDC auxiliary power supply card ( AP181 )
This card can supply the power to 6 transmitters. The output rating is 24 ± 1 VDC, 180 mA in maximum,
30mA / each transmitter.
Summary of Contents for VR06
