4.13 Return spring adjustment
Before performing this adjustment, make sure that the shafts are turned to the correct position.
See the marks at the end of the shafts, the arrows must point directly towards each other, like in
the fi gure below.
Then the springs can be adjusted to the correct length, i.e. 68 mm.
Note! It is critically that the length on these two return springs is 68 mm !
BRAILLO
●
NORWAY AS
B 400 Series 3
60
68mm
68mm
Summary of Contents for 400 S 3 Series
