Brady PAM 3600, Service Manual

Page: 57 / 98

57
Printer Applicator System PAM 3600
Service Manual PAM 3600 5 Adjustments
5.8 Adjusting the Label Edge Sensor
To adjust the label edge sensor see section 2.4.
5.9 Setting the Speed of the Compressed Air Driven Assemblies
Setting the Speed of the Peel-off Table Movement
The speed of the peel-off table movement can be set via two valves. Those valves regulate the speed of the
compressed air.
LIFT
CYL.
V
ACUUM
BLOW
-
AIR
BRAKE
T
ABLE
SUPPOR
T
AIR
PRINT HEAD ROT
A
TE
CYL.
2 3 1
Figure 5m Setting the speed of the peel-off table movement
1 Valve for forward movement
2 Valve for backward movement
3 Valve key table
Remove the cover.
Turn one of the valves (1, 2) to regulate the speed.
Turning clockwise will close the valves.
A wider opening of the top valve (1) speeds up the table moving forward.
A wider opening of the bottom valve (2) accelerates the backward movement.
3. Check the speed by releasing a movement of the table. For that purpose press the integrated key (3) on the
concerning valve.
4. If the setting is correct mount the cover.
1.
2.
-
-