Brady PAM 3600, Service Manual, Page: 19 / 98

19
Printer Applicator System PAM 3600
Service Manual PAM 3600 2 Expanded Functions for Servicing
2.4 Expanded functions in the "Service" Menu
In the "Service" menu, the operator only has access to the "Firmware update" and "Firmware from card" function.
The following functions are available after the service key respective the OEM key have been inserted:
Firmware update
Firmware from card*
Clear service counter
Adjust gap sensor
Save NVRAM*
Load NVRAM*
Set OEM Name
Functions marked with * are only available if the CF memory card is installed.
Clearing the Service Counter
The printer has two counter sets, a total and a service counter. The following data is recorded in both counter sets:
Operative time: time the printer has been switched on
Number of labels: number of labels printed
Transfer print:
length of material printed in transfer print
Thermal direct: length of material printed in direct thermal print
The total counter contains the values for the total elapsed service life of the printer. The values of the total counter
are shown in both the short status and in the status printout.
The service counter can be reset with the use of the service key after major maintenance or repair work.
The service counter consequently provides information about the print output since the last reset.
The service counter is reset as follows:
Switch from online mode to the offline menu by pressing the key.
Press the or key until you reach the "Service" menu, and then press the key.
Now select the "Clear service counter" function, and then press the key.
"No" appears in the display. Change the selection to "Yes" with or and press .
This resets the service counter.
You can check the value reset in the status printout.
1.
2.
3.
4.