Brady LabelMark 3 User Manual Download Page 57

Page: 57 / 98

Printing Label Files

3. Leave the system default for

Orientation

since

LabelMark

will set it.

4. Set

the

Properties

if necessary.

Note:

With some operating systems (or some printer drivers) you must set printer properties in the

windows

Control Panel

. Refer to your printer’s user manual or printer driver help file for

information on setting printer properties.

5. Click

Troubleshooting Printer and Part Problems

Symptom/Message Possible

Cause Corrective

Action

Printer is not printing

Your print job may have been
sent to the wrong printer.

Select the correct printer. See

Selecting a Printer

The COM port settings on your
printer may not be set correctly.

Refer to the user's guide for
your printer.

The label part used to design
the

LabelMark

file does not

match the labels loaded in the
printer.

Change to the proper label part.
See

Selecting a Different Label

Part

"Out of Labels" message
(TLS2200 and TLS PC Link
printers only)

The printer is out of label
material.
The computer chip on the TLS
label roll is not making contact
with the sensor in the printer.

Replace the label material roll.
Make sure the label roll is
seated correctly and snugly
between the material guides.

"Out of Ribbon" message
(TLS2200 and TLS PC Link
printers only)

Printer is out of ribbon.

Replace ribbon cartridge.

"Error Writing to COM 1"
message

Printer is turned off.

Turn the printer on.

Printer is disconnected from the
computer.

Connect the printer to the
computer.

Summary of Contents for LabelMark 3



































































































Search results

Summary of Contents for LabelMark 3

Reviews:

Related manuals for LabelMark 3

Brands by name

Popular brands

Brady LabelMark 3, User Manual

Search results

Summary of Contents for LabelMark 3

Reviews:

Related manuals for LabelMark 3

Brands by name

Popular brands