Brady LabelMark 3, User Manual

Page: 38 / 98

LabelMark 3 User Guide
32 Advanced LabelMark Techniques
Gap between labels – space between each label.
Horizontal The horizontal space between each label column.
Vertical
The vertical space between each label row.
Label size – full physical label size.
Width Physical width of the label part.
Height Physical height of the label part.
Printable area – the portion of the label that will print.
Width The width of the printable area of the label.
Height
The height of the printable area of the label.
X-Offset
The distance between the left side of the label and the
printable area.
Y-Offset The distance between the top of the label and the printable
area.
Permashield
TM
Part Layout
A – Top margin
B – Left margin
C – Horizontal gap
D – Vertical gap
E – Label width
F – Label height
G – Printable width
H – Printable height
I – X-Offset
J – Y-Offset
Note: A clear overlaminate extends past
the label on each side. As a result, the
printable area is smaller than the label
size.
4. Save your changes:
Click Save Part to Database to make your custom part available along with the master Brady
parts the next time you create a label file. LabelMark prompts for a part name and ensures
that you do not overwrite a master part. Your new part will appear at the bottom of the
Master parts list.
Click Apply to File to use the modified part only in the current file. You will not see your
custom part along with the master Brady parts the next time you create a new label file. The
system adds an asterisk to the part in the status bar to indicate it is modified.
5. Click Close when finished.