3
Installation
S19-788H
Bradley Corporation • 215-1416 Rev. P; ECN 12-05-001C
4/3/2012
Dimensions
14"
(356mm)
37
⁵⁄₈
"
(956mm)
6"
(152mm)
34¼"
(870mm)
44¼"
(1124mm)
1
Eyewash installation — S19-788H
Remove the plastic dust plug from the bottom of the yoke
assembly and discard.
Attach the eyewash yoke assembly to the
tank. Max. torque 150 In-Lbs. Route the
cable through the tank handle.
NOTICE: Check to ensure the heat trace
cable from the yoke assembly is not
kinked or damaged from assembly.
A
Attach the pressure gauge to the adapter
on the pressure side of the tank with
pipe sealant (by installer).
B
NOTICE: When attaching the pressure
gauge to the tank inlet, hold the
adapter (item 3) with a wrench to
prevent stripping. Failure to do so
may damage the seal and cause
leakage. Max. torque 150 in-lbs.
