21
Installation
Phenolic Privacy Restroom Partitions, Floor-to-Ceiling — Series 700, — 69", 72" & 69"/72" Tall
Bradley •
HDWC-INSTR-045 Rev. A: ECO 20-14-002S
6/25/2021
6f
Wall-Hung Pilasters (69") – Continuous Stainless Steel Brackets
(Used with 69" Tall Door) (Optional)
To establish level line, from the highest point in the room, measure 9" Ref. (229) from the floor. Use a level to transfer
this mark to the pilaster plumb line.
See Step 2a for instructions on mounting the continuous stainless steel brackets to a wall.
Wall
Specified Dimension
(Standard Gap 1" (25))
Pilaster Plumb Line
Floor
Pilasters at Wall
Pilasters at Pilasters
Specified
Dimension
See Step 4a for instructions on mounting the continuous stainless steel brackets to a pilaster.
Slide the wall-hung pilaster into the continuous
bracket and align with the established level line .
Refer to the submittal drawing and adjust to meet
the specified dimension .
A
Using the bracket as a template, drill Ø1/4" holes
through the pilaster at each pilaster bracket hole .
Secure the pilaster to the bracket using the
#10-24 x 1/2" barrel nuts and #10-24 x 1/2" shoulder
screws provided .
B
Slide the wall-hung pilaster into the continuous
bracket and align with the established level line .
Refer to the submittal drawing and adjust to meet
the specified dimension .
A
Using the bracket as a template, drill Ø1/4" holes
through the pilaster at each pilaster bracket hole .
Secure the pilaster to the bracket using the
#10-24 x 1/2" barrel nuts and #10-24 x 1/2" shoulder
screws provided .
B
CL
Notch indicates
bottom of
pilaster .
Notch indicates
bottom of
pilaster .
Refer to the
submittal drawing
for the correct
orientation
of the pilaster .
Refer to the
submittal drawing
for the correct
orientation
of the pilaster .
Floor
9" Ref .
(229)
9" Ref .
(229)
