18
Phenolic Privacy Restroom Partitions, Floor-to-Ceiling — Series 700, — 69", 72" & 69"/72" Tall
Installation
6/25/2021
Bradley •
HDWC-INSTR-045 Rev. A: ECO 20-14-002S
6c Pilasters and Panels with Stainless Steel Continuous Brackets – Stacked Panel (Optional)
Check to make sure the pilasters are plumb and level to each other. The pilaster height can be adjusted with the leveling screw that
was placed at the bottom of the pilaster (see page 11 for attaching leveling screw).
Cut the H-bracket to fit between the U-brackets and
then place onto the bottom panel . Place the top
panel into the H-brackets and U-brackets as shown .
E
Using the bracket as a template, drill Ø1/4" holes
through the top panel at each panel bracket hole .
Secure the panel to the bracket using the
#10-24 x 1/2" barrel nuts and #10-24 x 3/8" machine
screws provided .
F
Pilasters with Panels
(Stacked Panels - Bottom)
Pilasters with Panels
(Stacked Panels - Top)
Refer to your submittal drawing and leave the appropriate
gaps. Standard gap is 1" (25) between the panel and wall
and 1/2" (13) between the panel and pilaster.
Refer to your submittal drawing and leave the appropriate
gaps. Standard gap is 1" (25) between the panel and wall
and 1/2" (13) between the panel and pilaster.
Spacer 6" (152) for 72" Tall Panels (72" Tall Option)
Spacer 9" (229) for 69" Tall Panels / ADA Stall (69" Tall Option)
Spacer 6" (152) for 72" Tall Panels (72" Tall Option)
Spacer 9" (229) for 69" Tall Panels / ADA Stall (69" Tall Option)
Using the bracket as a template, drill Ø1/4" holes
through the bottom panel at each panel bracket
hole . Secure the panel to the bracket using the
#10-24 x 1/2" barrel nuts and #10-24 x 3/8" machine
screws provided .
D
Slide a shoe onto the top of the pilaster and use
a piece of tape to keep the shoe positioned about
5" (127) from the end . Make sure the shoe mounting
hole is towards the bottom .
B
Place the pilaster into the shoe secured to the floor
while at the same time placing the brackets around
the panel .
C
Place the panel on the spacer and insert the panel
into the wall bracket .
A
