Programmazione
17
14 - PROGRAMMING THE PROPOR-
TIONAL/INTEGRAL VALUE
-
Make sure that the unit is in OFF mode.
-
Press button
P
twice (fig. 41).
Either the word
or the word
will appear on the display.
-
Press either the button or the button
(fig. 42) to select
. The proportional inte-
gral control system is selected.
-
Press the
P
button
,
appears on the
display (fig. 43).
-
Press button or (fig. 44) so as to select
control system P1, P2, P3 or P4.
-
With either P1, P2 or P3 selected, press the
P
button to exit programming.
If the P4 programme is selected then pro-
gramming continues as explained in the
following pages.
42
41
44
43
X2
