Installazione
8
1 - INSTALLATION
Install the unit in a position which is suitable
for correct room temperature measurement
for example on an internal wall. Avoid instal-
lation in niches, behind doors or curtains, or
near heat sources
The TA450 is intended to be wall mounted
as follows:
• Open the unit by pressing button
A
(fig. 2)
while at the same time pulling in the direc-
tion of the arrows.
• Remove the terminal block cover (fig. 3)
and fasten the back of the unit either to the
wall (fig. 4) or within the recessed box using
the screws and wall plugs supplied (fig. 5, 6).
ATTENTION. For the unit to work properly,
we recommend that it be mounted on a flat
surface. Be careful not to tighten the screws
excessively.
A
4
5
6
2
3
