background image

4

FUNCTIONS

Clock

As an alternative to displaying the current temperature the time can be displayed instead 
(hours and minutes). Simply press the display temp/time button 

.

User Profile

Two different user profiles are available that feature three different temperature levels 
(COMFORT, ECO and NIGHT). These profiles can be used in both “HEATING” and “COOLING” 
modes.

Heating, Cooling and System Bypass

The TA450 can operate in either “HEATING” or “COOLING” mode with the additional option 
of frost protection without temperature control. Both modes offer the selection of three 
different temperature levels.

Three levels of temperature control

In order to obtain the maximum of comfort in either heating or cooling mode the TA450 
offers the possibility of selecting, in a simple and intuitive way, three different temperature 
levels (COMFORT, ECO and NIGHT) which together allow for temperature programmability 
over the range +3°C to +35°C. The TA450 is pre-programmed with the following tempera-
ture values.

In heating mode

In cooling mode

COMFORT             20 °C

COMFORT            24 °C

ECO                       18 °C

ECO                      26 °C

NIGHT                    16 °C

NIGHT                  28 °C

If these values correspond to your needs then the TA450 will not require further program-
ming. 

Accumulated System Operating Time

The TA450 features an hour-counter (up to 9,999), which records the system’s overall number 
of operating hours.

Remote Control

By means of a telephone dialler or similar appropriate telephone controlling device the 
TA450 can be activated remotely thus guaranteeing a warm welcome home. Remote  
control activation is made evident by the presence of the dedicated   icon on the display.

Note. Closing the isolated contact will activate the thermostat at the programmed tempera-
ture; opening it will turn the thermostat OFF.

 

Summary of Contents for TA 450

























Reviews: