Programmazione
14
The display will reveal the total operating time
for 5 seconds.
To reset the counter to zero and start a new
count, press the button while the figures
are visible. The indication disappears after
5 seconds.
-
Close the cover.
10 - TEMPERATURE CONTROL LEVEL
PROGRAMMING (COMFORT, ECO AND
NIGHT)
As described in the “User Profile Selection”
chapter select the user profile and operating
mode for which the temperature control
level is to be personalised.
-
Open the cover.
-
Check to see that either the heating or
cooling symbol is displayed.
-
Press button
P
(fig. 29).
The word
appears on the display
signifying COMFORT.
- The required temperature for the COMFORT
temperature control level can now be set by
means of the or buttons (fig. 30); the
word
will disappear from the dis-
play to be replaced by the new temperature.
-
To confirm the new temperature value
press the
P
button; the temperature will
appear on the display.
-
Repeat this procedure for the other two
temperature control levels ECO (
)
(fig.
31) and NIGHT (
)
(fig. 32).
10 seconds after the last action the unit exits
the procedure and accepts as valid the data
inserted up to that moment.
-
Once the temperature control levels have
been set press the
P
to confirm and exit
programming mode.
NOTE. The display will flash for two second so
as to confirm the modifications.
-
Close the cover.
29
31
30
32
