13
Basic Operation
Turning the Detector ON
Follow these steps to turn on your Land Ranger™ detector.
1. Hold the detector with the search coil about waist high and press
the
POWER ON/OFF
touch pad.
The unit emits three beeps and
Ar
appears momentarily in the
TARGET
readout, indicating that the detector is measuring the air.
2. When
IR
appears in the
TARGET
readout, lower the detector to the
ground and select from one of two Land Ranger‘ modes of operation:
◆
ALL METAL
—This mode is used to detect all metals without motion.
In this mode, metals are identified by volume increases in only one
continuous medium tone.
◆
DISCRIMINATION
—This is a motion mode that allows you to
eliminate undesirable objects from detection. In this mode, metals
are identified via the LCD display and with three distinct tones. By
pressing Disc Touch Pad after
IR
appears, you automatically enter
motion All Metal Mode; no metals are rejected.
DISCRIMINATION Mode
In
DISCRIMINATION
mode, you can accept all targets, select
PRESET
targets, or program your own combination of targets to accept or reject.
In this mode, the detector must be in motion to detect targets.
▲
To accept all targets
1. Perform the steps described in
Turning the Detector ON
section of
this manual.
2. Press the
DISC TARGET
touch pad to “lock-in” the programming.
Summary of Contents for Land Ranger
