Bounty Hunter Land Ranger Owner'S Manual Download

Page: 17 / 48

The blinking arrow under

IRON/FOIL

disappears and

appears in the

TARGET

readout (indicating that the detector is

set to accept all metals, including all levels of iron) as shown

in the following diagram.

▲

To select PRESET targets

The Land Ranger‘ has three

PRESET

modes:

1. Perform the steps described in

Turning the Detector ON

section of

this manual.

2. Press the

DISC TARGET

touch pad.

A blinking arrow appears under

IRON/FOIL

in the

Probable

Target ID

fields, meaning the detector is ready for programming.

3. Press the

PRESET

touch pad once to select

PRESET 1.

The blinking arrow under

IRON/FOIL

is replaced by an

4. Press the

PRESET

touch pad twice to select

PRESET 2.

appears under

PULL TAB

in the

Probable Target ID

fields

5. Press the

PRESET

touch pad three times to select

PRESET 3.

appears under

Z-1¢/S-CAP

in the

Probable Target ID

fields

PRESET 1

Rejects all levels of iron and aluminum foil.

PRESET 2

Rejects pull-tabs, iron and all objects rejected in

PRESET 1

mode.

PRESET 3

Rejects zinc pennies, screw-caps, pull-tabs, aluminum, other similar

objects, and all objects rejected in

PRESET 1

and

PRESET 2

modes.

Summary of Contents for Land Ranger

















































Search results

Summary of Contents for Land Ranger

Reviews:

Related manuals for Land Ranger

Brands by name

Popular brands

Bounty Hunter Land Ranger, Owner'S Manual

Search results

Summary of Contents for Land Ranger

Reviews:

Related manuals for Land Ranger

Brands by name

Popular brands