SENSITIVITY
The
SENSITIVITY
dial is located on the top left of the LCD display and is
used in conjunction with the
LOW (-)
or
HIGH (+)
touch pads to adjust
the Land Rangers™ sensitivity while operating in
DISCRIMINATION
mode. The arrow points to the selected setting. Adjust sensitivity to
eliminate electromagnetic interference or to adjust detector depth.
DEPTH
The
DEPTH
dial is located on the top right of the LCD display and
indicates the depth of the detected target in a range of 2-10 inches. The
arrow points to the detected depth. When the depth exceeds 10 inches,
an arrow appears under
DEEP TARGET
in the
PROBABLE TARGET ID
fields. Depth detection is usually accurate to eight inches or less for
coin-sized objects only.
BATT
The
BATT
dial is located on the bottom left of the LCD display and
indicates battery strength as follows:
G
=Good
F
=Fair
L
=Low
R
=Replace
11
▲
Dials
The LCD display has five indicator/adjustment dials, as shown in the
following diagram. All are used to monitor the detector’s operation, and
the
SENSITIVITY
and
LEVEL
dials are used in conjunction with touch
pads on the control panel to adjust the detector’s sensitivity.
Summary of Contents for Land Ranger
