20
▲
To update ground balancing
Anytime the detector detects a target, normal fluctuations in ground
conditions cause the arrow on the
GROUND MONITOR
dial to move
from its center 0 position slightly right or left; the Land Ranger™
SMART
TRAC
feature automatically adjusts to these minor variances usually
within 15 to 20 seconds. If the arrow does not return to its center 0
position after 15 to 20 seconds, or if at any time you are unsure about
the ground balance, do the following:
1. First, make sure that you are not standing over a detected target.
2. Press the
ALL METAL SMART TRAC
touch pad until
gb
appears
in the
TARGET
readout.
3. When
rY
appears in the
TARGET
readout, the unit is ready for
use.
TIP:
When ground balancing the unit, make sure that there is no metal
on top of or under the ground, otherwise you won’t be able to tell if
the tone being emitted is caused by metal or soil mineralization. If
you think you are over metal, move to another spot—observe your
GROUND MONITOR
carefully when moving the search coil to
another spot. If in the - range, it is balancing for negative conditions;
if in the + range, it is balancing for positive ground conditions or
detecting a metal object.
NOTE:
Once you’ve adjusted for ground conditions, your settings will
not change until you turn the unit
OFF,
even if you go back and
forth between
ALL METAL
mode and
DISCRIMINATION
mode.
Summary of Contents for Land Ranger
