54 Setup
EXECUTE: Prnt Scrn
All of the parameters in this menu are action parameters.
Terminal
parameters affect all
settings, including the emulation.
Session
choices affect only settings that relate to the
chosen emulation. In dual session (host) mode, there are two independent sets of
session parameters (Session 1 and Session 2). To toggle between sessions, use the
Ctrl-Enter
(Num) keystroke.
Save Terminal:
Save all settings in non-volatile (permanent) memory, including
those associated with the session selected.
Reset Terminal:
All terminal parameters are initialized. It also performs reset pages
and default modes.
Recall Terminal:
Revert to all terminal and session settings that were saved in
nonvolatile memory. A “Reset Terminal” is also performed. This is referred to as a
hard reset and is equivalent to turning the terminal off and back on.
Default Terminal:
Load all defaults for the terminal and session, including the
emulation. A “Reset Terminal” is also performed.
Save Session:
Save all the settings associated with the chosen session.
Reset Session:
Initialize all session settings. This is also referred to as a “Soft-Reset.”
Perform page-resets and default modes. “Mode” specifies the parameters used by a
session which are not selectable through Setup such as Insert-Mode, Split-Screen, and
Graphics-Mode.
Recall Session:
Load the previously saved settings associated with the chosen
emulation. A “Reset Session” is also performed.
Default Session:
Load all defaults associated with the session selected.
Reset Ports:
Clear the transmit buffers for the host and printer port, and receive
buffer for the host port. Unlocks the keyboard and clears its buffer data.
Clear Screen:
Clear the screen and the entire page.
Default Session UDKs:
Set the contents of all the function and edit keys associated
with the chosen session to their factory default states.