HOST: F7 45
HOST: F7
Comm Mode:
[
Full Duplex
, Half Duplex, Full Block, Half Block]
Select the communications mode.
Half-duplex is not available when KeyMode is
ScanCode
.
Receive <CR>:
[
<CR>,
<CR><LF>]
Select the way in which carriage returns received will be interpreted.
Receive <DEL>:
[
Ignore
, Destruct <BS>]
Choose to ignore the DEL control code (7Fh) when received or to treat it as a
Destructive Backspace code.
Send ACK:
[Off,
On
]
Decide whether the terminal should respond to inquiry (05h) or when certain terminal
functions are performed (configuring the EIA (Aux) ports, splitting screen, etc.) with
the ACK (06h) character.
Null Suppress:
[
On
, Off]
In the default mode, the host i gnores all received nulls (00 hex). When
off
is selected,
the terminal will accept all received nulls, and act upon them according to the selected
emulation.
Send Line Term:
[
<US>
, <CR><LF>]
Select which line terminator is sent. <US> is 1Fh and <CR><LF> is 0Dh 0Ah.
Local:
[
Off
, On]
Select whether keyed data is interpreted locally by the terminal and not sent to the
host. Data sent by the host is lost, if Local is
on
. The ability to print data is not
affected by this mode.
Send Block Term:
[<ETX>,
<CR>
]
Select which character will indicate the end of a block. The choices above are for
ASCII emulations. ANSI emulations have the following choices:
[
None
, FF].
Send End:
[Cursor,
Region
]
Select whether the end is indicated by the scroll region or by the cursor location.
Send Region:
[
Screen
, Scroll]
Choose whether the terminal sends data from the entire screen or from the scrolling
region.
Alt Input Data:
[
On
, Off]
Select whether data from second serial port is set to the host. This selection is only
available when Sessions=One.
PRINT: F8
Print Mode: [
Normal
, Auto, Controller]