38 Setup
Overscan Borders:
[
On
, Off]
Choose whether the overscan borders are active. The borders extend video from one
edge of the screen to the next. (To see the borders, select
reverse
for Screen Video.)
KEYBOARD: F4
Language:
[
U.S.
, U.K., Danish, Finnish, French, German, Norwegian,
Portuguese, Spanish, Swedish, Dutch, Belgian-Flemish, Fr-Canadian, Italian, Latin
American, Swiss-French, Swiss-German, Turkish]
Select the language type which matches your keyboard’s layout.
Language:
[
U.S.
, U.K., Danish, Dutch, Finnish, Belgian-Flemish, French,
Fr-Canadian, German, Italian, Norwegian, Spanish, Swedish, Swiss-German,
Swiss-French, Turkish]
Select the language type which matches your keyboard’s layout.
Char Set Mode:
[
PC
, ANSI, ASCII]
Choose which NRC set to use. This selection is only available in National Mode and
foreign languages. In VT emulations, the default is
ANSI
. To determine which sets are
loaded for each mode, refer to the
260xx Programmer’s Reference Guide
.
Key Mode:
[
ASCII
, ScanCode]
Select whether keys transmit ASCII codes or the ScanCode. The ScanCode transmits a
“make code” when a key is pressed and a “break code” upon its release. When
ScanCode is selected, “Comm Mode” is forced to
Full Duplex
and “Character Set” is
forced to
Multinational
(8-bit).
Keyclick:
[
On
, Off]
Choose whether pressing a key results in a clicking sound. The default is
off
in SCO
Console emulation.
Key Repeat:
[
On
, Off]
Choose whether keys, including function keys, will repeat when pressed for more than
half a second. This setting does not affect the following keys on the EPC keyboard:
Caps Lock, Scroll Lock, Num Lock, Shift keys, Ctrl keys, Alt keys, Return, Print
Screen, Pause. On the ANSI keyboard, the following keys are unaffected: Lock, F1–
F5, Shift keys, Control, Compose, and Return.
