GENERAL: F2 35
Auto Scroll:
[
On
, Off]
Choose whether the terminal updates the display when the cursor is moved beyond the
boundaries of the currently viewed screen.
Monitor Mode:
[On,
Off
]
Choose whether control codes will be displayed as their graphic representations or be
acted upon as terminal/cursor commands.
Screen Saver:
[Off, 2 min,
5 min
, 15 min, 30 min]
Select whether the screen will go blank after lack of activity from the keyboard or the
host of the selected period of time. The first key typed at the keyboard when the
screen is blank will reactivate the display. The keycode will not be transmitted to the
host. The Caps Lock LED (or Lock on the ANSI keyboard) will flash while Screen
Saver is active.
Use screen saver to prevent “phosphor burn” on the screen when the display on the
terminal is left unchanged for an extended time period.
20 minutes after the screen saver is activated, Energy Star, a power saving feature, is
activated. The first key typed at the keyboard brings the energy level back up.
Bell Volume:
[0, 1, 2, 3, 4, 5,
6
, 7, 8, 9]
Select the bell volume from off [0] to high [9]. This will be the volume for alarm
tones, warning bells, and keyclicks.
Warning Bell:
[
On
, Off]
Select whether a warning bell is sounded when errors (such as an invalid compose
sequence) are encountered.
Host/Printer:
Designates physical ports to the host and printer for the selected
session. See the Quick menu earlier in this chapter.
Sessions:
[
One
, Two]
Select the number of sessions (hosts) that the terminal will run. See the Quick menu
earlier in this chapter.
