Boumatic Xpedia 360 EX, Installation Instructions Manual

Page: 88 / 91

9e1006b
Page 88
Attention!
Attention!
8. DECOMMISSIONING
8.1 SPECIAL PERSONNEL QUALIFICATION REQUIRED FOR
DECOMMISSIONING
8.2 SAFETY INSTRUCTIONS FOR DECOMMISSIONING
8.3 SPECIAL DANGERS INVOLVED IN DECOMMISSIONING
8.4 FINAL DECOMMISSIONING / DISPOSAL
Decommissioning may only be performed by specially qualified personnel in accordance with the safety instruc-
tions.
Also see the section on “Personnel qualification“.
In order to prevent damage to property and/or life-threatening injury to people when decommissioning, the fol-
lowing points must always be observed:
• All of the steps involved in the decommissioning work must be worked through in the order specified.
• First of all, make the operating area for decommissioning completely safe.
• Make sure that operating supplies are disposed of without harming the environment.
Also read the chapter on “Safety“.
• Components which have not been removed correctly may fall off or twist.
• There is a risk of injury from open components /tools/… with sharp edges.
• Suspended loads can fall and then there will be a risk of death – do not stand underneath suspended
loads!
After decommissioning, all of the components should be handled correctly and disposed of in accordance with
valid local requirements on the disposal or recycling of waste.