Boumatic Xpedia 360 EX, Installation Instructions Manual

Page: 37 / 91

DMRE13011614
DMRE13011614
9e1006b
Page 37
5.5 LAYOUT AND FITTING THE STALLS
1. Fix the four diametrically opposed floor slab supports onto the top ring (see Figures 11 & 14).
2. Perfectly align the supports with the middle of the rotary with the aid of a cord, observing the radius R11, and
checking that the four diagonals are the same (see Figure 14).
3. Make the supports level, using 0.8 and 1.2mm (0.03 and 0.05 in.) shims (see Figure 13).
4. Starting with these four supports, and on each side, fit the remaining floor supports, observing the radius R11,
dimensions CC8 and CC9, levelling up and following a base of the shuttering. The distribution of the sectors must
be as accurate as possible.
Figure 13:
REINFORCED CABLEWAY
STALL FLANGE
M10 H NUT
10x80 H SCREW
M12 LOCKNUT
M12x50 SSTH SCREW
ATTENTION!: LEVEL UP THE STALLS
USING 0.8 / 1.2 mm
0.03 / 0.05’’ SHIMS
U-CLAMP
FRAMING SUPPORT