Boston Whaler 190 Outrage, User Manual

Page: 50 / 88

2-12
190 Outrage
Section 2 • General Information
R
Your 190 Outrage is equipped with a hydraulic
steering system. The steering consists of:
• Steering wheel and helm pump unit
• Engine hydraulic cylinder
• Hydraulic hoses and fi ttings
Operation
When turning the steering wheel either clockwise or
counterclockwise, the helm pump forces hydraulic
fl uid through hoses to and from the engine cylinder
which is connected to the tiller arm.The engine
cylinder moves the tiller arm to port and starboard,
depending upon the direction the steering wheel is
turned.
For your convenience there is a lever at the base of
the steering wheel housing that can be used to adjust
the angle of the steering wheel.
Steering
Do not cover cracks in the steering cable or
fi ttings with tape or other sealants. This will
create a hazard in which the cable can fail
without warning.
!
CAUTION
NOTICE
The system does not eliminate engine torque.
This can only be accomplished by proper trim
and tilt settings.
Maintenance
Proper maintenance of this system will ensure worry-
free usage for the life of your boat.
Steering system integrity is imperative when
engaging in recreational water activities.Special
care and attention must be taken to ensure proper
performance of the steering system and should
include the following:
• After the fi rst few hours of operation and at
regular intervals, check all fasteners and the
complete steering system .
• Check all moving parts to be sure they
are free of salt build-up and other foreign
material. Such build-up will affect their
operation and cause steering problems.
Periodically remove the cable, clean the hinge tube
thoroughly, and lubricate with a marine type
waterproof grease.
Hydraulic Steering
Fig. 2.12.1
STEERING WHEEL
FLUID REFILL BOTTLE
REFILL TUBE (SUPPLIED)
FLUID FILL
HELM PUMP
FLUID LINES
BLEEDER VALVES
ENGINE MOUNTED
STEERING CYLINDER
1
2
1
2
3
4
5
6
8
7
3
4
5
6
7
8
9