Boston Whaler 190 Outrage User Manual Download Page 42

Page: 42 / 88

2-4

190 Outrage

Section 2 • General Information

Overall Length

18’10”

5.74 m

Trailerable Length

22’11”

6.99 m

Bridge Clearance (no top)

6’5”

1.96 m

Bridge Clearance (no Light) 7’6”

2.32 m

Bridge Clearance (Light)

9’2”

2.97 m

Beam

8’0”

2.43 m

Draft, (Hull only)

12”

.30 m

Weight (dry, no engine)

2050 lbs.

930 kg

Specifi

cations & Dimensions

(Specifi ed measurements are approximations and are subject to variance.)

Optional equipment and loading of the boat will affect the draft measurements. Follow the recommendations listed

on your capacity plate regarding the maximum amount of weight your boat can safely carry.

Exceeding this weight will affect the boat’s performance.

DO NOT

Exceed the weights listed on the

capacity plate.

Dimensions & Clearances
Fig. 2.4.1

18’10”

22’11”

8’0”

9’2”

12”

6’5”

The canvas shown here
is for reference only.

7’6”

Swamped Capacity

4000 lbs

1814 kg

Maximum Engine Weight

530 lbs.

240 kg

MaximumWeight,

2200 lbs

998 kg

(passengers, engine(s), gear

)

Persons

Maximum Horsepower

200 HP

149 kw

Minimum Horsepower

115 HP

85 kw

Fuel Capacity

58 gal.

220 L

Summary of Contents for 190 Outrage

























































































Search results

Summary of Contents for 190 Outrage

Reviews:

Related manuals for 190 Outrage

Brands by name

Popular brands

Boston Whaler 190 Outrage, User Manual

Search results

Summary of Contents for 190 Outrage

Reviews:

Related manuals for 190 Outrage

Brands by name

Popular brands