Boston Whaler 190 Outrage, User Manual

Page: 45 / 88

2-7
190 Outrage
Section 2 • General Information
R
Through Hull Fittings
Fig. 2.7.1
1
2
3
1
2
3
ANCHOR LOCKER DRAIN
LIVEWELL INTAKE
BILGE SUMP DRAIN
1
2
3
4
5
6
1
2
3
4
5
6
Through Hull Fittings, Aft
Fig. 2.7.2
PORT DECK DRAIN
PORT MOTORWELL DRAIN
STARBOARD MOTORWELL DRAIN
BILGE PUMP OUTLET
LIVEWELL DRAIN
STARBOARD DECK DRAIN
NOTICE
• The deck drain provides self-bailing
capabilities while the boat is static in the
water and no passengers on board. This
feature prevents the accumulation of water
in the cockpit.
• Depending on the type of boat you have, you
may have underwater fi ttings that need drain
plugs. Garboard drain plugs and fi shbox drain
plugs need to be in place before the boat goes
into the water. Any fi tting that will be
underwater needs to be plugged or the
seacock needs to be closed.
• Through hull fi ttings should be checked for
proper seal annually. When the boat is in the
water the underwater fi ttings can be
checked for dripping. It is recommended that
the underwater fi ttings be removed, cleaned
and resealed every other year.
• If the through hull fi ttings need to be
replaced, it is recommended that an
authorized Boston Whaler
®
dealer perform
this type of repair. Through hull fi ttings that
are improperly installed can cause premature
hull failure and may void the Boston Whaler
®
limited warranty.
• A standard 1” “Snap-Tite” plug can be used to
replace the drain plug(s) in your boat. It is
recommended that you carry spare plugs to be
used in the event that the drain plug(s) become
lost or damaged.
Location of Thru-Hull Fittings