Guidance and Manufacturer’s Declaration – Electromagnetic Immunity
The SWISS LITHOCLAST® TRILOGY
is intended for use in the electromagnetic environment specified below. The
customer or the user of the SWISS LITHOCLAST® TRILOGY
should ensure that it is used in such an environment.
Portable and mobile RF communications equipment should be used no closer to any part of the SWISS LITHOCLAST®
TRILOGY, including cables, than the recommended separation distance calculated from the equation applicable to the
frequency of the transmitter.
These guidelines may not apply to all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people. Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radios, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be considered.
Immunity Test
IEC 60601
Test Level
Compliance level
Electromagnetic Environment
– Guidance
Conducted RF
IEC 61000-4-6
3 V rms
150 kHz to 80 MHz
6 V rms
in ISM and amateur radio bands
3 V rms
150 kHz to 80 MHz
6 V rms
in ISM and amateur radio bands
If the measured field strength
in the location in which the
SWISS
LITHOCLAST®
TRILOGY is used exceeds
the applicable RF compliance
level
above,
the
SWISS
LITHOCLAST®
TRILOGY
should be observed to verify
normal operation. If abnormal
performance
is
observed,
additional measures may be
necessary,
such
as
re-
orienting or relocating the
SWISS
LITHOCLAST®
TRILOGY.
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to 2.7 GHz
80% AM at 1KHz
3 V/m
80 MHz to 2.7 GHz
80% AM at 1KHz
Minimum separation distance
shall be calculated by
following equation:
E is the immunity test level in
[V/m]
d is the minimum separation
in [m]
P is the maximum power in
[W]
39
Summary of Contents for Swiss LithoCast Trilogy FT-235
Page 2: ...2 ...
