Proximity fields
from RF wireless
communications
equipment
IEC 61000-4-3
27 V/m
380-390 MHz
50% PM 18 Hz
28 V/m
430-470 MHz
FM ±5 kHz deviation, 1kHz sine
9 V/m
704-787 MHz
50% PM 217 Hz
28 V/m
800-960 MHz
50% PM 18 Hz
28 V/m
1700-1990 MHz
50% PM 217 Hz
28 V/m
2400-2570 MHz
50% PM 217 Hz
9 V/m
5100-5800 MHz
50% PM 217 Hz
27 V/m
380-390 MHz
50% PM 18 Hz
28 V/m
430-470 MHz
FM ±5 kHz deviation, 1kHz sine
9 V/m
704-787 MHz
50% PM 217 Hz
28 V/m
800-960 MHz
50% PM 18 Hz
28 V/m
1700-1990 MHz
50% PM 217 Hz
28 V/m
2400-2570 MHz
50% PM 217 Hz
9 V/m
5100-5800 MHz
50% PM 217 Hz
RF
wireless
equipment
maximum output power and
separation distance tested (at
30 cm):
TETRA 400: max 1.8 W
GMRS 460, FRS 460: max 2
W
LTE Band 13, 17: max 0.2 W
GSM 800/900: max 2 W
TETRA 800: max 2W
iDEN 820: max 2W
CDMA 850: max 2 W
LTE Band 5: max 2W
GSM 1800/1900: max 2 W
CDMA 1900: max 2W
DECT: max 2 W
LTE Band 1,3,4,25: max 2 W
UMTS: max 2W
Bluetooth: max 2W
WLAN 802.11b/g/n: max 2W
RFID 2450: max 2W
LTE Band 7: max 2 W
WLAN 802.11 a/n: max 0.2 W
Interference may occur in the
vicinity of equipment marked
with the following symbol:
If the measured field strength in the location in which the SWISS LITHOCLAST® TRILOGY is used exceeds the
applicable RF compliance level above, the SWISS LITHOCLAST® TRILOGY should be observed to verify normal
operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or
relocating the SWISS LITHOCLAST® TRILOGY
Table 9
Recommended separation distances between portable and mobile RF communications
equipment and the SWISS LITHOCLAST® TRILOGY
The SWISS LITHOCLAST® TRILOGY
is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the SWISS LITHOCLAST® TRILOGY
can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the SWISS LITHOCLAST® TRILOGY
as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum output
power of transmitter
[W]
Separation distance according to frequency of transmitter [m]
150 kHz to 80 MHz outside
ISM and amateur bands
d = 1.0
150 kHz to 80 MHz in ISM
and amateur bands
d = 1.0
80 MHz to 2700 MHz (for
define RF Wireless transmitter
see table before)
d = 1.0
0.01
0.1 m
0.1 m
0.1 m
0.1
0.32 m
0.32 m
0.32 m
40
Summary of Contents for Swiss LithoCast Trilogy FT-235
Page 2: ...2 ...
