12
4. Open the pump.
Figure 23
5. Place the stone catcher output tube into the pump.
Figure 24
6. Close the pump.
7. Connect the stone catcher output tube end with the
conical connector (A) to the optional fluid management
system or to your fluid disposal system.
A
Figure 25
8. Make sure that the output tube is not twisted or under
tension when placed in the peristaltic pump device
head.
Case 2: Use of an in-house aspiration system.
1. Screw the aspiration plug to the handpiece.
Figure 26
2. Connect the in-house aspiration system on the
aspiration plug.
3. Follow the instructions provided for the in-house
aspiration system.
Summary of Contents for Swiss LithoCast Trilogy FT-235
Page 2: ...2 ...
