Page 9
Step 2:
Remove all loose parts included in the container, e.g. hardware box.
Step 3:
Use scissors or a knife to cut
and remove
the straps securing the parts to the beam or tank assembly, including
fenders, wheels, tongue assembly and log trays then put aside these parts for assembly.
Step 4:
Use scissors or a knife to cut
and remove
the straps securing the engine / pump assembly to the crate bottom
and then place it carefully aside.
Step 5:
Use a pry bar or claw hammer to remove the plywood splinters securing the beam and tank assemblies on the
crate bottom. Take out the two heavy assemblies.
NOTE:
Due to the weight / size of the two assemblies, it’s recommended two or more adults to assist lifting and moving
the two assemblies. Lifting tools such as a hoist, crane or jack are recommended.
Step 6:
Inspect all log splitter components, parts and accessories according to the packing list attached in this manual
(Page 31) to make sure all items listed are included and there is no shipping damage.
If any parts are damaged or missing please call our customer service department at 1-800-780-2677 for
assistance.
NOTE:
DO NOT
discard the packing materials until you have carefully inspected, assembled and satisfactorily operated
the log splitter.
Page 12
