Page 12
REF. NO.
DECSRIPTION
QTY.
6
Beam assembly
1
7
Hardware mounted on the beam , including:
7-1
Hex head bolt / M12 x 35
4
7-2
Flat washer / M12
4
7-3
Lock nut / M12
4
STEP 4:
Installing the tongue assembly. See FIGURE 6
1. Remove the 6 sets of M12 hardware on both sides of the front end of the beam.
2. Position the tongue assembly so that the mounting bracket is on the inside of the frame under the main beam.
3. Slide the Bolts M12 x 40 just removed through the aligned holes and tighten the hardware using an 18mm wrench
for the bolts and a 19mm wrench for the lock nuts.
(FIGURE 5)
Page 15
(FIGURE 6)
