background image

Page 29

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LIMITED WARRANTY STATEMENT 

Boss Industrial, Inc., (“Boss Industrial”) warrants to the original retail purchaser that this BOSS brand outdoor product 

is free from defect in material and workmanship and agrees to repair or replace, at Boss Industrial’s, discretion, any 

defective product free of charge within these time periods from the date of purchase. 

 

Two years for all models if used for personal, family, or household use; 

 

180 days for any unit used for other purposes, such as rental or commercial. 

This warranty extends to the original retail purchaser only and commences on the date of the original retail purchase. 
Any part of the this product  manufactured or supplied by Boss Industrial and found in the reasonable judgment of 

Boss Industrial to be defective in material or workmanship will be repaired or replaced without charge for parts 
and labor by a Boss Industrial authorized service center.

 How to process a warranty claim? You must first call the 

BOSS INDUSTRIAL service hotline 1 800 780 2677. Our technical team will guide you in trouble shooting, repairing, or 

returning a defective part or machine. Any unauthorized repair or return without a valid Return Authorization 

Number from Boss Industrial will invalidate this warranty. The expense of delivering the product to the dealer for 

warranty work and the expense of returning it back to the owner after repair or replacement will be paid by the 

owner.

 Boss Industrial’s responsibility in respect to claims is limited to making the required repairs or replacements and 

no claim of breach of warranty shall be cause for cancellation or rescission of the contract of sale of any BOSS brand 

product. Proof of purchase will be required by the dealer to substantiate any warranty claim. All warranty work must be 

performed by a Boss Industrial authorized service center.

 

This warranty is limited to one hundred eighty (180) days from the date of original retail purchase for any Boss 

Industrial brand product that is used for rental or commercial purposes, or any other income-producing purpose. 

This warranty does not cover any BOSS brand product that has been subject to misuse, neglect, negligence, or 

accident, or that has been operated in any way contrary to the operating instructions as specified in this operator’s 

manual. This warranty does not apply to any damage to the product that is the result of improper maintenance or 

to any product that has been altered or modified. The warranty does not extend to repairs made necessary by 

normal wear or by the use of parts or accessories which are either incompatible with the BOSS brand product or 

adversely affect its operation, performance, or durability. In addition, this warranty does not cover: 

A.  Tune-ups – Spark Plugs, Carburetors, Adjustments, Ignition, Filters 
B.  Wear items – 

Tires, handles, nylon liners, rubber seals, hydraulic oil, etc… 

C.  Gas Engines – as they are covered under the Engine Manufacturers’ Warranty.

 

 

Boss Industrial reserves the  right  to  change  or  improve the  design  of  any BOSS brand  product  without assuming 

any obligation to modify any product previously manufactured. 

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE STATED WARRANTY PERIOD. ACCORDINGLY, ANY  SUCH  

IMPLIED  WARRANTIES INCLUDING MERCHANTABILITY, FITNESS FOR A  PARTICULAR PURPOSE, OR OTHERWISE, ARE 

DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-DAY 

WARRANTY PERIOD. BOSS INDUSTRIAL’S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED 

TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS AND BOSS INDUSTRIAL DOES NOT ASSUME OR AUTHORIZE 

ANYONE TO ASSUME FOR THEM ANY OTHER OBLIGATION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW 

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. BOSS INDUSTRIAL 

ASSUMES NO RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER DAMAGES INCLUDING, BUT NOT 

LIMITED TO, EXPENSE OF RETURNING THE PRODUCT TO AN AUTHORIZED BOSS INDUSTRIAL SERVICE CENTER AND 

EXPENSE OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES, 

RENTAL OF A LIKE PRODUCT DURING THE TIME WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, LOSS OR 

DAMAGE TO PERSONAL PROPERTY, LOSS OF REVENUE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, OR 

INCONVENIENCE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 

This warranty applies to all BOSS brand products manufactured by or for Boss Industrial and sold in the United States. 

 

 

 

Page 32

 

 

WARRANTY 

Summary of Contents for GD13T21





































Reviews: