Page 8
WARNING!
Use extreme caution unpacking this machine. Some components are very heavy and will require
additional people or mechanical handling equipment.
NOTE:
All references in this manual to the left or right side and front or back of the log splitter are from the operating
position only. Exceptions, if any, will be specified.
Unpacking tools needed:
1. Wrench 13mm
2. Scissors or knife
3. Pry bar or claw hammer
Step 1:
Use a 13mm wrench to remove all the bolts and washers securing the side frames on the metal crate, put aside
the side frames and hardware just removed and then lift away the crate top and the cardboard box. See FIGURE 2.
UNPACKING THE CONTAINER
ASSEMBLY & SET-UP INSTRUCTIONS
Crate Top
Crate Side Frame
x 4PCS
Cardboard box
Flat Washer
x 32PCS
Hex head bolt
x 32PCS
Crate Bottom
Hardware box
(FIGURE 2)
Page 11
