Installing the facing panels
6 720 613 057 (2006/04)
40
10.7 Covering the roof
10.7.1 Upper pan tiles
B
Place one whole pan tile on top of the upper facing
panel.
B
Cut the pan tile so that:
– it covers the facing panel (Fig. 59, Item 2) as much
as possible, but does not come into contact with it,
and
– the cut pan tile is lying at the same angle as the uncut
pan tiles (this ensures that the pan tile cross-section
is continuous and regular). You can adjust the angle
using the pan tile overlay.
B
Place the pan tile overlay (Fig. 59, Item 1) according
to the calculated position and fasten to the roof bat-
ten.
B
Lay the cut pan tiles (Fig. 59, Item 3).
10.7.2 Side pan tiles
B
Cut pan tiles to dim. X (Table 5, page 17) and lay.
i
USER NOTE
Fasten cut pan tiles with suitable brackets
if necessary (available from a roofing spe-
cialist).
CAUTION!
BUILDING DAMAGE
from roof leaks if pan tiles are not placed
far enough over the facing panels.
Fig. 59
Laying and securing the pan tile overlay
Item 1: Pan tile overlay
Item 2: Cut pan tile
Item 3: Upper facing collector
63043975.49-1.SD
63043975.49-1.SD
1
3
2
1
Summary of Contents for Worcester FKT Series
Page 43: ...6 720 613 057 2006 04 43 ...
