Troubleshooting NL
Malfunction
Cause and Troubleshooting
Loud noise during
spinning.
Device feet are not fixed.
▶
Secure the device feet. Adjusting the device
Transport protections have not been removed.
▶
Remove transport locks
Clapping, clattering
in the pump.
A foreign object has entered the pump.
▶
"Cleaning the drain pump", page 39
Slurping, rhythmic
suction sound.
Pump is active, the water is being pumped out.
▶
No error - normal operating noise.
wrinkling.
Spin speed is too high.
▶
Set a lower spin speed for the next wash.
The load quantity is too high.
▶
Reduce the load during the next wash.
The wrong program has been selected for the type of
fabric.
▶
Select a suitable program for the type of fabric.
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Low spin speed is set.
▶
Set a higher spin speed for the next wash.
▶
Start the program Centrifuge..
To iron lightly is activated.
▶
Select a suitable program for the type of fabric.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge..
51
