The Ministry in essence NL
Required: The laundry is prepared.
13.6 Starting the program
1.
Open the door.
Remark: If you want to change the
time until the program end, first set
the ready-in time.
Make sure the drum is empty.
2.
Place the laundry in the drum.
▶
on Start/Refill
to press.
3.
Close the door.
a The drum rotates and a
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
a The display shows whether the program
duration or the ready-in time is
displayed.
a After the program end, it shows
display: -0-.
Make sure that no small items of
laundry are caught in the door.
13.5 Dosing detergent and care
agent
In programs where intelligent dosing
is not possible or desired, you can
dose the detergent manually.
13.7 Soaking laundry
Tip: In addition to the intelligent
dosing, you can also add other
detergents such as stain remover,
starch or bleach to the manual dosing
compartment. Do not add additional
detergent to the manual dosing
compartment to avoid overdosing or
foaming.
Remark: No additional detergent is
needed. The soapy water is then used
for washing.
1.
Start the program.
2.
To pause the program, after about
10 minutes, press Start/ Refill
.
3.
To resume the program after the
desired soaking time, pressStart/
Refill
.
Remark: Follow the directions for
13.8 Adding laundry
1.
Press Start/RefillThe
device pauses.
.
1.
Pull out the detergent drawer.
2.
Fill with detergent.
Remark: When
it is not possible to add laundry.
appears
3.
If desired, fill with a care product.
4.
Slide the detergent drawer into the
appliance.
When
washing laundry possible.
goes out, then the refill
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
Press Start/Refill
.
33
