Bosch WAX32KC1FG User Manual And Installation Instructions Download Page 47

Page: 47 / 60

Troubleshooting NL

Malfunction

Program does not start.

Cause and Troubleshooting

Switch off the device.

Clean the pump unit.

→

"Cleaning the detergent drawer",

Page 38

If the indication reappears, enable the service.

→

"Customer Service", page 56

Remark: You can start the washing program if you

deactivate the intelligent dosing system and dose

manually.

→

"Buttons", Page 25

Door cannot be

opened.

is activated.

▶

Resume the program by Centrifuge. or Drainto

choose and press Start/Refill

to push.

→

"Resume program at rinse hold", page 34

Temperature is too high.

▶

Wait for the temperature to drop.

▶

→

"program cancel", page 34

Water level is too high.

▶

Start the program pump down.

Power cut.

▶

Open the door with the emergency release.

→

"Emergency release", page 55

Washing water is not

pumped out.

Drain pipe or water drain hose is clogged.

▶

Clean the drain pipe and the water drain hose.

Drain pipe or water drain hose is kinked or

pinched.

▶

Make sure that the drain pipe and the water

drain hose are not kinked or pinched.

Drain pump is clogged.

▶

→

"Cleaning the drain pump", page 39

is activated.

▶

Resume the program by Centrifuge. or Drainto

choose and press Start/Refill

to push.

→

"Resume program at rinse hold", page 34

Water drain hose is connected too high.

▶

Install the water drain hose at a maximum height of 1

meter.

Pump cover not assembled correctly.

▶

Assemble the pump cover correctly.

Summary of Contents for WAX32KC1FG





























































Search results

Summary of Contents for WAX32KC1FG

Reviews:

Related manuals for WAX32KC1FG

Brands by name

Popular brands

Bosch WAX32KC1FG, User Manual And Installation Instructions

Search results

Summary of Contents for WAX32KC1FG

Reviews:

Related manuals for WAX32KC1FG

Brands by name

Popular brands