Bosch WAX32KC1FG User Manual And Installation Instructions Download Page 53

Page: 53 / 60

Troubleshooting NL

Malfunction

Cause and Troubleshooting

Detergent residue on

the dry laundry.

▶

When the intelligent dosing is activated, reduce the

basic dosing amount

→

Page 37.

Insufficient cleaning

next operation.

Basic dosing amount not set correctly.

▶

If the intelligent dosing is activated, set the basic

dosing amount

→

Page 37correctly.

Detergent or care agent in the dosing containers of

the intelligent dosing system has thickened.

Check whether the detergent used is suitable.

→

"Detergent and laundry care agent",

Page 32

Empty the dosing containers.

→

"Cleaning the detergent drawer",

Page 38

Clean the dosing containers.

Refill the dosing containers.

→

"Filling the dosing container", page 36

Unsuitable detergent has been placed in the dosing

container of the intelligent dosing system.
1.

Check whether the detergent used is suitable.

→

"Detergent and laundry care agent",

Page 32

Empty the dosing containers.

→

"Cleaning the detergent drawer",

Page 38

Clean the dosing containers.

Refill the dosing containers.

→

"Filling the dosing container", page 36

At the water supply

feed hose is leaking water.

The water inlet hose is not correctly / firmly

connected.

Connect the water supply hose correctly. Connect

water supply hose

Tighten the coupling properly.

Water is leaking from
the water drain hose.

Water drain hose is damaged.

▶

Replace the damaged water drain hose.

Water drain hose is not connected correctly.

▶

Connect the water drain hose correctly. Water drainage

connection types

Summary of Contents for WAX32KC1FG





























































Search results

Summary of Contents for WAX32KC1FG

Reviews:

Related manuals for WAX32KC1FG

Brands by name

Popular brands

Bosch WAX32KC1FG, User Manual And Installation Instructions

Search results

Summary of Contents for WAX32KC1FG

Reviews:

Related manuals for WAX32KC1FG

Brands by name

Popular brands