Troubleshooting NL
Malfunction
Cause and Troubleshooting
▶
Make sure that the water supply hose is not
kinked or pinched.
The detergent drawer is not closed as far as it will go.
▶
Push the detergent drawer into the appliance as far as it
will go.
Pump unit is not installed.
1.
Place the pump unit in the detergent drawer.
"Cleaning the detergent drawer",
2.
Push the detergent drawer into the appliance as far as it
will go.
Detergent dosage is too high.
▶
Immediate measure: mix a tablespoon of fabric
softener with 0.5 l of water and pour this mixture into
the manual dosing compartment (not for outdoor,
sportswear and down textiles).
▶
When the intelligent dosing is activated, reduce the
basic dosing amount
▶
When dosing manually, reduce the amount of
detergent for the next wash with an equal load.
burns.
Temperature is too high.
▶
Wait for the temperature to drop.
▶
Water level is too high.
▶
Start the program pump down.
Laundry is wedged in the door.
1.
Open the door again.
2.
Remove trapped laundry.
3.
Close the door.
4.
To start the program, press Start/Refill
.
flashes.
Door is not closed.
1.
Close the door.
2.
To start the program, press Start/Refill
.
All other error codes.
Malfunction
▶
Please contact customer service.
45