NL Troubleshooting
Malfunction
Cause and Troubleshooting
High spin speed
rental is not
reached.
Low spin speed is set.
▶
Set a higher spin speed for the next wash.
To iron lightly is activated.
▶
Select a suitable program for the type of fabric.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge..
Program centrifugal
run does not start.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge..
fizzing, hissing
loud.
Water is flushed into the detergent drawer under
pressure.
▶
No error - normal operating noise.
long, humming
loudly before the start
of the washing or
softening cycle.
Intelligent dosing system doses detergent or care
agent.
▶
No error - normal operating noise.
Short buzzing sound
after switching on
of the device.
Intelligent dosing system performs a function test.
▶
No error - normal operating noise.
Loud noise during
spinning.
The appliance is not leveled properly.
▶
Adjusting the device
50
