Bosch WAX32KC1FG User Manual And Installation Instructions Download Page 55

Page: 55 / 60

Transport, storage and disposal NL

18.1 Emergency release

Close the tap.

Empty the water inlet hose.

Turn off the device.

unlock door

Required: The drain pump is empty.

→

Page 39

Unplug the appliance from the

mains.

1. ATTENTION! Running water can

lead to material damage.

▶

Do not open the door if water can

be seen behind the glass.

Let the suds drain.

→

"clean drain pump",

Page 39

Disassemble the hoses.

Empty the dosing containers.

Pull the emergency release

downwards with the aid of a tool

and release it.

19.2 Installing transport locks

Secure the device before transport

with the transport locks to avoid

damage.

Remove the 4 cover caps using a

screwdriver.

a The door lock is unlocked.

Place the service door and click it into

place.
3.

Close the service door.

transport, storage and disposal

9 Transport, on-

hit and drain

Keep the cover caps.

Install the 4 transport locks. When

doing so, observe the description

Removing transport locks and

proceed in reverse order.

huh

transport, store anddrain

Here you will get an explanation about the way

on which you prepare the device for

transport and storage. We also

explain how to dispose of old

appliances.

19.3 Restarting the device

19.1 Dismantling the device

▶

For more information, see

Remark: Detailed instructions for use

can be found at www.bosch-

home.com or by scanning the QR code

on the title page of these operating

instructions.

Summary of Contents for WAX32KC1FG





























































Search results

Summary of Contents for WAX32KC1FG

Reviews:

Related manuals for WAX32KC1FG

Brands by name

Popular brands

Bosch WAX32KC1FG, User Manual And Installation Instructions

Search results

Summary of Contents for WAX32KC1FG

Reviews:

Related manuals for WAX32KC1FG

Brands by name

Popular brands